Corning® disposable spinner flask, with aseptic, 1 L

Description

• Features and Benefits: Each system is packaged in a separate, double bag Flask body is made up of polystyrene, caps from high-density polyethylene, and polypropylene is used to make the paddle and shaft Side arm of a preassembled flask has one connector attached with a flat cap on an opposite side arm Without having to adjust the height of the paddle, the extended paddle design ensures constant liquid motion from top to bottomDead spots are removed by the paddle′s bottom contours, which hug the flask′s shape Two large neck openings allow for easy pouring To ensure better mixing and maximize cell production vertical side baffles break up laminar flow Gamma-irradiated sterilized with sterility assurance level (SAL) of 10-6 and meets the bacteriostasis, fungistasis, and sterility standards of USP XXIV:71A 25mm-diameter vent filter with a polyvinylidene fluoride (PVDF) membrane and 0.2-micron pores and a barbed fitting completes the venting port Only for single use, flasks cannot be alcohol-resterilized or autoclaved, materials will deteriorate in any attempt to do so Aseptic transfer and vented caps are available optionally A rigid polypropylene dip tube that is angled to reach the flask′s bottom is attached to the liquid transfer port′s internal endCompatible with corning microcarriers in both suspension and adherent cell culture applications A heat-sealable and chemically resistant tubing ends in a male luer lock (MLL) connector closed with a female luer sealing cap on the external side
• Legal Information: Corning is a registered trademark of Corning, Inc.